299 replies to this topic

[tholmq]

Hello,

My name is Ty & my birth date is May 1945.

My hobbies and interests include:
Car Rallying
Greatrace
Calculators
Blackjack
Picture Framing
Horse Race Betting
Learning to program


My user name is a concatenation of my first & last name.

[flyingfisch]

Hello,

My name is Ty & my birth date is May 1945.

My hobbies and interests include:
Car Rallying
Greatrace
Calculators
Blackjack
Picture Framing
Horse Race Betting
Learning to program


My user name is a concatenation of my first & last name.

What calculators do you own? And are you really 65?

[tholmq]

I'll be 67 next month.

I'm trying to decide which calculator to buy. Please see the following post:

http://www.casiocalc...?showtopic=6749

Can you help me decide. TI has not responded to me yet. I don't want to get the HP-50G (75 Mhz) because of the RPL programming language.

Any help would be greatly appreciated. I need to get this within the next week.

Ty

[JackZhan]

Name(optional):
Jack
Birthday:
9-27
Age:
16
Interest:
IT, Photojournalism, calculators:)
Where you got your username: from my real name

[Forty-Two]

Hello Jack! Are you interested in programming? If so, what type? (C, basic, asm) Have you written anything yet?

[JackZhan]

Hello Jack! Are you interested in programming? If so, what type? (C, basic, asm) Have you written anything yet?

Hello 42, as said in my profile I have programed C for years. For example I have written a program that outputs all 4x4 magic squares into a file. I am now working on a DOS add-in on the 9860 as I found it has addresses(\\fls0\ for example). But the problem is text-style console inputting. Can you help me? Must I use getkey and print( ?

[flyingfisch]

Welcome to UCF, Jack!

I replied to your thread about text input, hope it helps

[Forty-Two]

Hello 42, as said in my profile I have programed C for years. For example I have written a program that outputs all 4x4 magic squares into a file. I am now working on a DOS add-in on the 9860 as I found it has addresses(\\fls0\ for example). But the problem is text-style console inputting. Can you help me? Must I use getkey and print( ?

A dos addin, hmm? Have you considered porting bash? (The default shell for many <{GNULINUX}> distributions) It fixes many of the idiosyncrasies of QDOS, and adds some new features (like piping). You can also view the source of bash, while you only have experimentation to work on when porting something dos-like. If bash is too large for your purposes (it most likely is), you could try porting ash source: ftp://ftp.slackware.com/pub/slackware/sla...sh-0.4.0.tar.gz (Note that the source is a tarball, and that you'll need 7-zip or something like that on windows).

[Gil]

Name(optional): Gil

Birthday: 11/03/1972

Age:40

Hobbies: Football

Interests: Software

Where you got your username: my choice

Hope i can help and be helped around here.

best regards

[flyingfisch]

Hello Gil, do you program in any computer languages? (C, BASIC, Python)

[Suppi INDIA]

Name(optional): Supreeth Sagar

Birthday: 26-03

Age:21

Hobbies: WildLife Photography, Trekking, adventure, Off roading & Rallying

Interests: Blogger, Love to read, Hate to study

Where you got your username: UCF

[flyingfisch]

Hi Suppi INDIA, and welcome to UCF

Do you program at all?

[Forty-Two]

Love to read, Hate to study

^^ This

[drewkman]

Hi!

Name: Andrew

Birthday: 05/12

Age: 18

Hobbies: Reading, writing, learning, listening to music, biking.

Interests: Physics, science in general, space science & exploration, technology, literature, philosophy. I'm curious about programming but I've only dabbled in C++ a bit.

Where you got your username: It's a contraction of my first and last names.

[Forty-Two]

Have you ever programmed for your fx? I suggest trying out basic first, CrimsonCasio's BASIC tutorial should help.

[flyingfisch]

Hi drewkman, welcome to UCF

If you want to get started with programming your fx, Forty-Two mentioned a good tutorial. You may also want to try LuaFX and C/C++/ASM.

[drewkman]

Have you ever programmed for your fx? I suggest trying out basic first, CrimsonCasio's BASIC tutorial should help.

No I haven't. A friend who's more tech-savvy than me has dabbled a bit and shown some of it off to me. I'd quite like to have a go – thanks very much for the recommendations, Forty-Two and flyingfisch!

[flyingfisch]

You're welcome, hope you enjoy it here

[Forty-Two]

No I haven't. A friend who's more tech-savvy than me has dabbled a bit and shown some of it off to me. I'd quite like to have a go – thanks very much for the recommendations, Forty-Two and flyingfisch!

If you work hard, read a lot, and ask questions, you may be the more tech-savvy of yourselves in time.

[flyingfisch]

If you work hard, read a lot, and ask questions, you may be the more tech-savvy of yourselves in time.

Working hard is the main thing. You may feel like you are making no progress, and then all of a sudden you get your program to work. It can be frustrating, but all in all, its very fun.

[Noize]

Name(optional): Richard

Birthday: 2nd May

Age: 38

Hobbies: Electronics and Pubs

Interests: Electronic music technology, film, travel, and partying.

Where you got your username: Off the top of my head.

[flyingfisch]

Welcome to UCF!

Hope you find the information you are looking for. You have some nice old calculators

[Forty-Two]

Hey, Noize, welcome to UCF! I see you're interested in music with electronics; have you checked out ?

[Noize]

Hey, Noize, welcome to UCF! I see you're interested in music with electronics; have you checked out ?

its better than the original.

[Ben Ward]

Name(optional): Ben

Birthday: 18/7

Age: 16

Hobbies: Music/Maths

Where you got your username from: It's my name

[Forty-Two]

Hello Ben, and weclome to UCF! What type of math are you interested in? Have you done any programming for your fx?

[aero91]

Hi everyone!

Name(optional): Silvia

Birthday: 09 August

Age: 20

Interests: music, technology, films

Where you got your username: I'm studying aerospace engineering

[flyingfisch]

Hi aero, welcome to UCF!

I am planning to go into aerospace engineering, but that's still a few years off.

Do you live in the USA?

[aero91]

Hi aero, welcome to UCF!

I am planning to go into aerospace engineering, but that's still a few years off.

Do you live in the USA?

No, but maybe in the future...who knows. It still seems to be a land of opportunities do you? If you've got the passion, I think it will be perfect for you. I read from your presentation that you're taking flying lessons!Cool!

[flyingfisch]

Yes, I live in the US.

And I am taking flight lessons, but have to wait till im 17 for the in-air training

[aero91]

Yes, I live in the US.

And I am taking flight lessons, but have to wait till im 17 for the in-air training

I'm sure it will be worth the wait!

[Forty-Two]

Hey aero, welcome to UCF. Btw, where are you from? I did a whois on you but it only came up as RIPE Network Coordination Centre. A quick Google shows that that's the main hub for Europe, located in the Netherlands. Does that mean that you're an admin there?

[aero91]

Hey aero, welcome to UCF. Btw, where are you from? I did a whois on you but it only came up as RIPE Network Coordination Centre. A quick Google shows that that's the main hub for Europe, located in the Netherlands. Does that mean that you're an admin there?

Not really. Anyway, I'm from Italy.

[2072]

Hey aero, welcome to UCF. Btw, where are you from? I did a whois on you but it only came up as RIPE Network Coordination Centre. A quick Google shows that that's the main hub for Europe, located in the Netherlands. Does that mean that you're an admin there?

Just use this online whois tool: http://whois.domaintools.com/ it correctly tells you the country of an IP address.

[Forty-Two]

I did. Try it on his IP address.

[2072]

Well it says Italy

[flyingfisch]

Not really. Anyway, I'm from Italy.

You're from Italy? Cool!

You guys have a lot of great plane manufacturers over there, including piaggio (I love the Avanti).

[Forty-Two]

Well it says Italy

Hmm, I used http://news.nic.com/cgi-bin/whois which is linked in the User Controls. I guess that gives different results.

[capac]

Birthday: 05 may 1988

Age: 24

Hobbies: sports

Interests: technology, cinema

Where you got your username: it's part of my surname

[flyingfisch]

Hi

You said you come from Italy, that's great! Do you own any calculators?