Posted 03 September 2002 - 12:13 PM
In the battery compartment, where the back- up battery is, there are 3 "conectors", 2 in the highest level and 1 in the lowest. What is their function?
Posted 09 September 2002 - 07:46 AM
Posted 09 September 2002 - 04:54 PM
i will publish some pics of an opened calc on my new casio-page.
Posted 10 September 2002 - 10:43 AM
Posted 10 September 2002 - 03:57 PM
Posted 11 September 2002 - 12:42 PM
This morning I took my volt-meter and pressed the ac button on the calculator. Then I connected one of the volt-meter cables to the bottom "connector" and the second one to the top left "connector", the volt-meter showed 3V, the backup batterys voltage. And then I connected the second kable to the top right "connector". And I showed 5,6 volt. Hmm I have to replace my batteries so I get 6V. So RSTWEB the to top connectors are the same. You can do the same. But be carefull, if you do it the wrong way you can damage your calc. Only do it if you know what you do
Why should casio build 3 connectors there?
1: It could be uses as a test thing when they produce the axf. They connect batteries and check if everything is ok.
2: Debugging. If your calculator is broken, the firm that fixes your calc. can check if the voltage is ok.
I can't think of anything else. I think that the bottom "connector" is -. But I'm not sure. And I can't think of any use.
Posted 11 September 2002 - 08:17 PM
I hope Mohamed reads this and corrects me if I'm wrong. I have checked out why they are there on the AFX, the AFX 2 to be sure.
Posted 12 September 2002 - 08:18 AM
nowhere is a hint if this topic should be about the cfx or afx. if there were subforums for cfx and afx it couldn't happened. the problem at the topic "BASIC libraries 2.00 released" wouldn't happened, too, if we had subforums.
Posted 14 September 2002 - 11:39 AM
Posted 16 September 2002 - 04:15 PM
And yes, I was talking about AFX.
So what did we reach?
They're to measure battery voltage?
I think not.
Posted 16 September 2002 - 08:14 PM
To run the tests, after the AFX have been built in CASIO's factory, whereas insert batteries in it (what is difficult to do for a robot) the calc is just put on something that power the calc just using 2 contacts...
Posted 17 September 2002 - 10:01 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users