Jump to content



Photo
- - - - -

Cp Ebook Reader


  • Please log in to reply
165 replies to this topic

#81 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 20 July 2007 - 09:52 AM

I've found a really terible bug: character value 0xEC , 0xED , 0xEE are not display correctly :blink: (these are control charactrs :huh: )! I cant test this project as much as I want :nonono: but you who have already used this, why dont you give me your feed back so that I can make it better?... :banghead:

Here is ver 2.5.4: http://www.casiocalc...amp;load_that=1 :(

Now you can use [pagebreak] mark to break current page (note that the maximum number of page is 128 )

I've also removed LuaFont and replaced it with a 6x8 fixed size font (TI 89's 6x8 font), and add a Vietnamese font which compatible with TCVN3 fonts (this is for me and Noah_ThunderStone). So the fonts number now is:
  • 0: Vector Font
  • 1:Basic Font
  • 2:Bold Font
  • 3:Ti89_Font6x8
  • 4:Ti89_Font4x6
  • 5:test_font_10
  • 6:Farsi_8x8
  • 7:vn_font_12
  • 8-F:test_font_10


#82 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 20 July 2007 - 05:12 PM

I have Harry Poster vol 7 full. PM me fore more details.

#83 kevinator9

kevinator9

    Casio Freak

  • Members
  • PipPipPipPip
  • 125 posts

  • Calculators:
    Classpad 300
    Classpad Manager

Posted 20 July 2007 - 09:03 PM

LoL! Wicked! Could you PM me please for Harry Potter?

#84 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 21 July 2007 - 12:46 AM

Yes... This volume is very suprising!

#85 kevinator9

kevinator9

    Casio Freak

  • Members
  • PipPipPipPip
  • 125 posts

  • Calculators:
    Classpad 300
    Classpad Manager

Posted 21 July 2007 - 10:07 PM

:lol: I got the book yesterday.

#86 Hobart

Hobart

    Casio Fan

  • Members
  • PipPip
  • 34 posts
  • Gender:Male
  • Location:Germany (Saxony/Ore Mountains)

  • Calculators:
    ClassPad 300

Posted 22 July 2007 - 09:24 AM

I've got a problem with the EBookMaker. :(
Everytime I want to convert a *.txt file I enter the two file names on the virtual classpad, but then an error message occures. I don't know why!
So I need some help, please! :rolleyes:

#87 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 22 July 2007 - 11:09 AM

Kevinator9 got a problem like this... But I can not find the bug... It works very well on my PC OS Microsoft Windows XP sp2... Can you tell me more details? (enter the two file names on the virtual classpad... :-? )

#88 girdeux

girdeux

    Casio Addict

  • Members
  • PipPipPip
  • 88 posts
  • Location:Spain / Castell?n

  • Calculators:
    casio fx-115ms;
    casio classpad 300

Posted 22 July 2007 - 02:48 PM

I enter in ebook maker i click on convert I select an .txt file and then a message error appears:

http://s33.photobuck...rrent=error.jpg

#89 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 22 July 2007 - 03:53 PM

That is an "Error report" of Windows... That's strange :-S Have the provious vers procedured bugs like this?

Anyway I'm looking at the code...

#90 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 22 July 2007 - 04:09 PM

:-S I really dont know what's wrong here... an you who got errors download this and tell me where you get error http://download480.m...er-checking.rar ?

#91 kevinator9

kevinator9

    Casio Freak

  • Members
  • PipPipPipPip
  • 125 posts

  • Calculators:
    Classpad 300
    Classpad Manager

Posted 23 July 2007 - 04:39 AM

:nonono: It didn't work with that file either. It said the reading file in little windows and writing file but It came back up with the same erroe window that girduex got (except in english :rolleyes: ). Here are the details of the rror though...
Error Signature:
AppName: ebookmaker-check.exe AppVer: 2.0.0.0 ModName: classpaddllgcc.dll
ModVer: 0.0.0.0 Offset: 000aac7b
The file included in the error: C:\DOCUME~1\FAMILY~1\LOCALS~1\Temp\b87e_appcompat.txt

#92 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 23 July 2007 - 05:32 AM

What is the file C:\DOCUME~1\FAMILY~1\LOCALS~1\Temp\b87e_appcompat.txt like ? :-/

In the test version, It will pop up some MessageBox to notify you where you are... What is your last MessageBox string?

#93 kevinator9

kevinator9

    Casio Freak

  • Members
  • PipPipPipPip
  • 125 posts

  • Calculators:
    Classpad 300
    Classpad Manager

Posted 23 July 2007 - 05:38 AM

Last One is 'Begin Saving EBook'
Then I put in the EBook's name and save file name.
Then it has an error.
And I can't find that file that it says is the error... It's not in Temp folder anymore?????

#94 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 23 July 2007 - 05:55 AM

After Input file name -> EBook name ->Author name?

#95 kevinator9

kevinator9

    Casio Freak

  • Members
  • PipPipPipPip
  • 125 posts

  • Calculators:
    Classpad 300
    Classpad Manager

Posted 23 July 2007 - 06:09 AM

I don't get to the Author Name. I only can put in Input File Name and EBook Name.

#96 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 23 July 2007 - 06:23 AM

I found the problem:

InputDialog *stda=new InputDialog(
"Input book name",//PEGCHAR * title,
"",//PEGCHAR * prompt,
(CP_CHAR *)newheader->BookName,//CP_CHAR * pBuff,
21//SIGNED iLen = -1
);
if(IDB_OK!=stda->Execute()) goto lbl_end;
Destroy(stda);
stda=new InputDialog(
"Author name",//PEGCHAR * title,
"",//PEGCHAR * prompt,
(CP_CHAR *)newheader->Author,//CP_CHAR * pBuff,
21//SIGNED iLen = -1
);
if(IDB_OK!=stda->Execute()) goto lbl_end;

Execute() function will self destroy te PegThing... But I really dont know why It works very well on my PC. I uploaded the fixed file: http://www.casiocalc...amp;load_that=1

#97 kevinator9

kevinator9

    Casio Freak

  • Members
  • PipPipPipPip
  • 125 posts

  • Calculators:
    Classpad 300
    Classpad Manager

Posted 23 July 2007 - 07:03 AM

You are the man Vanhoa! :thumbsup:
All works well except 'Link To ClassPadDLLgcc.dll'. I downloaded it and it is corrupt.

#98 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 23 July 2007 - 07:16 AM

Again it works very well for me :-? ?

Edit: you can run EBookMaker without the dll @-) ?

#99 kevinator9

kevinator9

    Casio Freak

  • Members
  • PipPipPipPip
  • 125 posts

  • Calculators:
    Classpad 300
    Classpad Manager

Posted 23 July 2007 - 07:23 AM

Not sure, I just used the old one I got from the older EBook version. It all works.

#100 kevinator9

kevinator9

    Casio Freak

  • Members
  • PipPipPipPip
  • 125 posts

  • Calculators:
    Classpad 300
    Classpad Manager

Posted 23 July 2007 - 07:30 AM

I have an error on the ClassPad. I have OS V3.01 and I was scrolling down the page and it said fatal exception error occured and restarted and I lost the file that I had put on the classpad...
Also are there picture tags or can you link to pictures??? Is it possible to make it able to edit things on your ClassPad instead of re-writing it on your PC and then putting it on, easier to link to stuff that way...

#101 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 23 July 2007 - 07:42 AM

Can you copy the file contain and paste here so that I can see what's wrong? As I have tested so far I havent seen any fatal... Thank you for feedback.

I will also try to add Picts.

#102 kevinator9

kevinator9

    Casio Freak

  • Members
  • PipPipPipPip
  • 125 posts

  • Calculators:
    Classpad 300
    Classpad Manager

Posted 23 July 2007 - 07:45 PM

I put this onto an *.mcs and then opened it with EBook.
-----------
ClassPad 300 Insctructions (ClassPad Version)

Here is some information so you can do many things to your classpad. The numbers in brackets are links to visuals to help you understand.

Connecting Your ClassPad 300 To Your Computer
Insert your CD ROM that came with your ClassPad 300. Then it will pop up with an internet website (1). Close this. Then open ?My Computer?. In ?My Computer? will be the file ?CLASSPAD300 (*:)? (* will be replaced by a letter that corresponds with your computers CD ROM drive. Eg My computer?s CD ROM drive is (D:).) If you double-click on this file you will see it will go to the webpage again. If you double-clicked it, then exit the webpage again and go back to ?My Computer?. But this time instead of double-clicking on ??CLASSPAD300 (*:)?, right-click on it and then click ?open? (2). Then in there you will see the folder ?ClassPad Manager ? Limited? (3). Double-click this. In here there is a file called ?setup? (4). Double-click this to start the installation (5). Click the appropriate buttons (6) to finish and complete the installation (7). When this is done you will have ClassPad Manager and will be able to use the ClassPad 300 on your computer! (8) (But you won?t be able to play the games you download for your ClassPad 300 on the ClassPad Manager.) Now, plug in your ClassPad 300 to your computer. This is a three step process. Plug the USB plug into a USB port. Turn on your ClassPad 300. Plug in the other end of the cord into your ClassPad 300 (10). It should automatically change to this screen (11). There might be a pop up on your computer saying ?Found New Software/Hardware, if this happens, do not fret. It might just install it by itself, if it doesn?t it may pop up with a window; just click all the appropriate buttons to finish/complete the installation. If it pops up saying it couldn?t complete the installation then it doesn?t matter that much, everything should and I repeat ?SHOULD? work, I cannot say everything will definitely work but they should. Now your ClassPad 300 is ready to connect to your computer. But what are you going to do with a ClassPad 300 that is connected to your computer but you don?t know what to do with it? Read on and you shall find out what you can do.

Getting Ready To Install Things Onto Your ClassPad 300
You need to know and do a few things before you try to put anything onto your ClassPad 300. You need to register to a few websites. Go to http://classpad.net/ . You will need to register here: https://classpad.net...regist_form.php . If you don?t know where the ?Product Number? is then it explains it here: http://ftp.casio.co..../Product_No.pdf (But there is a link to this page on the registration form). Once you have registered to http://classpad.net/ (you will need to follow any additional instructions that the website gives to you), you need to register to a few other sites. http://www.classpad.org/ is another website that you will need to register to. You can register to this site here: http://www.classpad.org/register.php/. When you are registered to this site we can move onto the next one (Remember to follow any more instructions given to you by that website as well). The next website to register at is http://www.casiocalc.org/. You can register here: http://www.casiocalc...act=Reg&CODE=00. Then when you are registered to http://www.casiocalc.org/ you can stop registering. What you have done is register to 3 websites that will give you:
*Programs that will allow you to install programs onto your ClassPad 300 (http://classpad.net/)
*Downloadable programs that you can put onto your ClassPad 300 (http://www.classpad.org/)
*Even more downloadable programs that you can put on your ClassPad 300 (http://www.casiocalc.org/)
It would be a good idea to bookmark these websites as you will need them for many things to come.

Upgrade Your ClassPad 300
Before you put anything onto your ClassPad 300, I strongly recommend upgrading your OS (Operating System) Version of your ClassPas 300. This is so many programs will work as some programs you download may not work with your Current (Old) ClassPad 300 OS Version or they may work incorrectly. First you need to download some software (?OS Update?) from http://classpad.net/. The OS Upgrade can be found here: https://classpad.net...3000_Update.exe. Remember your username for http://classpad.net/ as you will need to type it in to download the OS Update. Click accept and then accept the download (12). When that is downloaded you will have a new file called ?ClassPad_300_OS_Ver2203000_Update.exe? probably on your desktop (13), if not it is where your downloaded files from the internet usually go. Double-click this file and it will start the updating process (click yes to start the update (14)). Follow all the instructions given to you by the installer (they are very helpful instructions and are quite easy to follow) and your ClassPad 300 will now be updated! If you have the ?Spreadsheet? Add-In then you can delete that because version 2.2 has it already built in. If you don?t know how to delete the extra ?Spreadsheet? Add-In then here are the instructions. On your ClassPad 300, click ?System? (15), and then on the tabs near the top click on ?Add-In App.? (16). It will come up with all the Add-Ins you have on your ClassPad 300 (17). Tick the ?spreadsheet.cpa? box (18) and then click delete down the bottom (19). If you don?t have the extra spreadsheet, don?t worry about any of those instructions. Anyway you now have a fully updated Version 2 ClassPad 300 (20).
There is a Version 3 and Version 3.01 upgrade but it is developing stages and it would be a tad too risky for me to tell you how, you might end up losing all your data. That wouldn?t be good now would it?

?Add-Ins?
Now for some games for your classpad! First we need the program which will let you install these programs. Go to http://classpad.net/ and download the 'Add-in Installer'. It can be found at http://classpad.net/...ddin/addin.html. When download (12) install the add-in instaler on your PC (21), (22), (23). Go to http://classpad.org/...ries.php?cat=22 or http://classpad.org/...ories.php?cat=3 or http://www.casiocalc...s.games#totitle or http://www.casiocalc...ilities#totitle.
Choose some add-ins that take your fancy and download them. Unzip them. To Un-zip, select the zipped folder (24), right click the zipped folder and click extract (or unzip) here (25). It will extract it automatically (26), (27). This is the same for *.rar files. Connect your ClassPad 300 to your PC with your USB plug (1), (2), (3). Then open Add-in Installer on your PC (28). On your ClassPad 300, it may automatically connect to your PC when you plug it in (11). Push cancel (29), ok and then ?link' (30) -> install (31) -> add-in (32)? then ok and it will connect again to your PC properly (33) to install Add-ins (otherwise it won't put them on). Then in the add-in installer, push the connect button (34) (top-left below ?file?) and it will connect to your ClassPad 300 (35), (36). Then have the folder where all your add-ins are (probably desktop) and the add-in installer open. Select all of the add-ins and drag them (37) into ?applications? on the right-hand side of the add-in installer (38). It will put them all on your ClassPad 300 (39). Then click the disconnect button if it does not disconnect automatically (to the right of the connect button) (40). You now have those add-ins on your ClassPad 300 (41), (42).


If you are unsure about anything, want to ask a question or want more info email me at kevinator9 AT hotmail.com.

#103 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 24 July 2007 - 12:15 AM

Your problem is, you are using a letter with value 0xE2 in the txt file ( ClassPad Manager ??? Limited' (3) ) within the default font - Vector Font.

I will fix this bug. :rolleyes:

#104 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 24 July 2007 - 12:37 AM

You also used UNICODE text which will be lost when notepad save the file! (0x80 0x00...)

A new ver is avaiable to download anyway :rolleyes: : http://www.casiocalc...amp;load_that=1

#105 kevinator9

kevinator9

    Casio Freak

  • Members
  • PipPipPipPip
  • 125 posts

  • Calculators:
    Classpad 300
    Classpad Manager

Posted 24 July 2007 - 08:16 AM

Thanks heaps Vanhoa. Hopefully I can help you fix more bugs :thumbsup:

#106 kevinator9

kevinator9

    Casio Freak

  • Members
  • PipPipPipPip
  • 125 posts

  • Calculators:
    Classpad 300
    Classpad Manager

Posted 24 July 2007 - 08:52 AM

SWEET!!! This ROCKS!!! I can read Harry Potter at school now LoL at maths time. Haven't finished it yet :( ... Great Great GREAT work Vanhoa! And also great work on the Gnuboy! Grey scale makes so many games so much better! I cannot express in words how grateful towards you I am! Maybe smilies will help... :rock: :rockband: :lol: :nod: :bow: :thumbsup: :clap: :greengrin: :lol2: :beer:

#107 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 24 July 2007 - 12:45 PM

Opps, Harry Potter ++

To read it, I have to bring away a dictionary... 2 s reading Harry Potter and 10 s looking up new words... So I'mwaiting for the Vietnamese translation wich will be released on October :cry:

#108 kevinator9

kevinator9

    Casio Freak

  • Members
  • PipPipPipPip
  • 125 posts

  • Calculators:
    Classpad 300
    Classpad Manager

Posted 24 July 2007 - 08:05 PM

Bummer. At least you'll be able to read it better then and understand better.

#109 kevinator9

kevinator9

    Casio Freak

  • Members
  • PipPipPipPip
  • 125 posts

  • Calculators:
    Classpad 300
    Classpad Manager

Posted 25 July 2007 - 04:43 AM

The bookmarks on the CP doesn't work for me. I click add bookmarks and nothing happens, then I view bookmarks and nothing happens. What could be wrong?

#110 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 25 July 2007 - 04:47 AM

It havent been enabled yet, sorry

It could be easily enabled when I make a new input dialog... This could be done easily, but I can not pogram long things when I dont like to program...

#111 kevinator9

kevinator9

    Casio Freak

  • Members
  • PipPipPipPip
  • 125 posts

  • Calculators:
    Classpad 300
    Classpad Manager

Posted 25 July 2007 - 04:49 AM

OK no problem

#112 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 25 July 2007 - 12:14 PM

Recently there are some people send PMs to me which talking about convert a larger text file to EBook files. Please remember that The number of pages is 128 max, the size of each page is 4036 bytes max, so to read a lager file, you should split it (these numbers are base on the ClassPad's RAM size).

#113 kevinator9

kevinator9

    Casio Freak

  • Members
  • PipPipPipPip
  • 125 posts

  • Calculators:
    Classpad 300
    Classpad Manager

Posted 26 July 2007 - 03:42 AM

Also one thing that appears to happen is when I convert a *.txt file to a *.mcs and then onto EBook, I lose all the qutation marks and other things ('). You said something like I was using UNICode... Is that the problem...? How can I get the quote marks and exclamation marks (!) from the Harry Potter 7 onto EBook?

#114 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 04 August 2007 - 04:10 PM

Sorry for the late replie :P... You should use a tool to convert UNICODE to ASCII...
And do you need picture support? Is there any more bugs in this addin?

#115 kevinator9

kevinator9

    Casio Freak

  • Members
  • PipPipPipPip
  • 125 posts

  • Calculators:
    Classpad 300
    Classpad Manager

Posted 04 August 2007 - 07:28 PM

Nah, picture support isn't needed. Although the bookmark would be nice if it was activated, alos how do i convert unicode to ascii? Also could you PM me a site that has lots of books saved as .docs so I can get them? I have finished Harry Potter now so I need another book lol.

#116 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 05 August 2007 - 02:44 AM

To convert UNICODE to ASCII, I used ULTRAEDIT 32 (It is also a very good text editor with syntax high lighting and more...) but you must buy it...

The other way is seach google for "UNICODE to ASCII", you will see a lot of software/source to do so.

You should also seach google for "free EBooks download"...

I will play with the bookmark today...

#117 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 05 August 2007 - 04:35 AM

OK, I need some translators :P

"Set bookmark"
"BookMark %i"
"Successfully added BM%i"
"Failed adding BM %i"

#118 kevinator9

kevinator9

    Casio Freak

  • Members
  • PipPipPipPip
  • 125 posts

  • Calculators:
    Classpad 300
    Classpad Manager

Posted 05 August 2007 - 04:52 AM

K Thanks Vanhoa! What languages are you needing those translated into? I don't think I will be able to though because I only speak English :P

#119 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 05 August 2007 - 04:53 AM

To German and French... Let's wait for translators...


EDIT:

Because it jumped to the next page so I rewrite the words:
"Set bookmark"
"BookMark %i"
"Successfully added BM%i"
"Failed adding BM %i"


#120 vanhoa

vanhoa

    Casio Overlord

  • Members
  • PipPipPipPipPipPipPip
  • 854 posts
  • Gender:Male
  • Location:Vietnam

  • Calculators:
    AFX 2.0, CP 300, CP 330, nSpire, TI 89, FX 5800

Posted 05 August 2007 - 08:01 AM

Thank you.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users