I'm not sure if that topic was before. If it was just give me link to it.
1) Is there any working pc<->AFX transfer program for <{GNULINUX}>?
2) Does anyone use serial1.2? (I tried but I had some transfer error)
3) How can I compile C program under <{GNULINUX}>. (program which should work for 8086 processor under DOS)?
Gnu/linux & Afx Programming
Started by
4nic8
, Feb 12 2004 07:40 PM
8 replies to this topic
#1
4nic8
-
- Members
-
- 182 posts
Casio Freak
- Location:Warsaw, Poland
-
Calculators:
Casio AFX 2.0 ROM 1.01, TI-89 (ASM 2.08 HW 2.00)
Posted 12 February 2004 - 07:40 PM
#2
Andy.Davies
-
- [Legends]
-
- 1547 posts
Forum Ghost
- Gender:Male
- Location:Dorset, England
-
Interests:Age: 18
Studying: MEng in cybernetics at Reading uni
Interests: Progaming (VB, VB.Net, C#, Casio Basic)
Computers UBBD (Using, Building, Breaking & Destroying)
Gaming (FPS, RTS, RPG)
Electronics
Rock Music (Preferably Loud)
Riley's (Pool & Snooker Bar)
Driving (Preferably fast)
Aikedo (Martial Art) -
Calculators:
Algebra FX 2.0 ROM 1.01, FX9750G
Posted 12 February 2004 - 07:48 PM
for that you will need to speak to f-bert, i belive he is making an AFX <-> <{GNULINUX}> link program.
here is a link to the topic
here is a link to the topic
#3
huhn_m
-
- [Legends]
-
- 1957 posts
Casio Maniac
- Gender:Male
- Location:Germany / Dresden
-
Interests:Assembler(!!!)
Computers and Programming
Operating Systems
Programmable Calculators
Maths and everything arround it -
Calculators:
FX-82SX / AFX 2.0+ (ROM 1.03) / FX 1.0+ (ROM 1.03)
Posted 12 February 2004 - 08:00 PM
I want to write a DLL (.so) file for a cross platform interface but I'm not sure if
I'll mannage it. I need it for the UCN CD since it will be cross platform.
A compiler for C in <{GNULINUX}> that makes dos progs? Joking?
YOu'll have to use either the dos box or you have to install <{GNULINUX}> on your calc :-)
I'll mannage it. I need it for the UCN CD since it will be cross platform.
A compiler for C in <{GNULINUX}> that makes dos progs? Joking?
YOu'll have to use either the dos box or you have to install <{GNULINUX}> on your calc :-)
#4
[neo]f4kill
-
- Members
-
- 60 posts
Casio Addict
- Location:Montauban, France
- Interests:programming
-
Calculators:
G65, G100+, ClassPad 300
Posted 12 February 2004 - 08:59 PM
it seems to me that Flash 100 will be (and maybe is) avaible for <{GNULINUX}> ..
but I'm not sure
but I'm not sure
#5
Andy.Davies
-
- [Legends]
-
- 1547 posts
Forum Ghost
- Gender:Male
- Location:Dorset, England
-
Interests:Age: 18
Studying: MEng in cybernetics at Reading uni
Interests: Progaming (VB, VB.Net, C#, Casio Basic)
Computers UBBD (Using, Building, Breaking & Destroying)
Gaming (FPS, RTS, RPG)
Electronics
Rock Music (Preferably Loud)
Riley's (Pool & Snooker Bar)
Driving (Preferably fast)
Aikedo (Martial Art) -
Calculators:
Algebra FX 2.0 ROM 1.01, FX9750G
Posted 12 February 2004 - 09:09 PM
i want and need someone to make me a DLL (.DLL) that contains transmit, recive ans screenshot commands, for the AFX, as i am no good at that kind of thing. maybe i will ask mastermage or kiwicasio, it was one of them who made a 'simple' one for me.
#6
Bob Vila
-
- Members
-
- 768 posts
Casio Overlord
- Gender:Male
- Location:USA
-
Calculators:
FX 1.0+ : CFX-9850 GB Plus : TI-81
Posted 12 February 2004 - 10:59 PM
might be able to use Wine to run fa-123, but you would need to install the casio fonts... although i'm not completely sure that it will transmit to a cable, still dont have one 
you like dosbox over dosemu?YOu'll have to use either the dos box or you have to install <{GNULINUX}> on your calc :-)
#7
huhn_m
-
- [Legends]
-
- 1957 posts
Casio Maniac
- Gender:Male
- Location:Germany / Dresden
-
Interests:Assembler(!!!)
Computers and Programming
Operating Systems
Programmable Calculators
Maths and everything arround it -
Calculators:
FX-82SX / AFX 2.0+ (ROM 1.03) / FX 1.0+ (ROM 1.03)
Posted 13 February 2004 - 09:33 AM
nope! sorry, I confused them
Dosbox = good for games
DosEmu = good for apps
(TLINK doesn't run on dosbox)
Dosbox = good for games
DosEmu = good for apps
(TLINK doesn't run on dosbox)
#8
Guest_Bytefish Productions_*
Guest_Bytefish Productions_*
-
- Guests
Posted 13 February 2004 - 12:50 PM
HAS ANYONE CHECKED THE PROGRAM I GAVE YOU?
I dont have <{GNULINUX}>, but i'd like to know if the transfer program for <{GNULINUX}> works.
http://cafix.sourceforge.net/
is the link to it.
It's useless bullshitting around who is writing a program if you havent tried the one that already exists.
Please to all the <{GNULINUX}> Users here: Test it.
I dont have <{GNULINUX}>, but i'd like to know if the transfer program for <{GNULINUX}> works.
http://cafix.sourceforge.net/
is the link to it.
It's useless bullshitting around who is writing a program if you havent tried the one that already exists.
Please to all the <{GNULINUX}> Users here: Test it.
#9
dada66
-
- Members
-
- 51 posts
Casio Addict
- Location:France
-
Calculators:
Graph100 Rom1.00
Posted 17 February 2004 - 11:26 AM
Serial1.2 cans send or receive Flash (System, Drive L: To Q:) (ONLY!)
It works correctly with FXI cable.
Flash100 for <{GNULINUX}> (V1.22) (doesn't communicate with GComm)
http://fgpstudios.fr...d_prog=17&id=33 (< 190Ko)
You need Qt lib and g++. (Qt version >= 2.3)
Flash100 uses the same code for communicate with AFX 2.0(+)
It works correctly with FXI cable.
Flash100 for <{GNULINUX}> (V1.22) (doesn't communicate with GComm)
http://fgpstudios.fr...d_prog=17&id=33 (< 190Ko)
You need Qt lib and g++. (Qt version >= 2.3)
Flash100 uses the same code for communicate with AFX 2.0(+)
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users
