3 replies to this topic

[uvoK]

I drawed a function with the graph menu and pressed then Shift-7 (capture)
how can watch it? fa-124 says that "the file has no text format"?

[kucalc]

I don't it's possible to view captured pictures on FA-124. However, you can view captured pictures on your fx-9860 calculator:

1. Make sure you are in Linear Mode. To make sure, go into RUN-MAT mode and press Shift' /> + MENU' />. Where it says Input Mode :Linear.

2. Once making sure it's in Linear mode, press EXIT. Now press OPTN' />, then F6' />, then F6' /> again, then press F5' />, then press F1' />. RclCapt should appear on the screen now. Now type in the number where you stored the captured picture. Then press: EXE' />.

[uvoK]

I think I didn't describe the problem right-.
I want to capture it on my PC!

[kucalc]

I don't it's possible to view captured pictures on FA-124.

Seems I was incorrect. I reread the FA-124 manual and you can view captured pictures. uvok, download the FA-124 manual: http://ftp.casio.co....en/FA-124_E.pdf, and go to Chapter 7 titled Screen Capture. Here's what it says:

Capturing a Screen to Your Computer

* fx-9860G SD/fx-9860G

1. On the fx-9860G SD/fx-9860G, turn on manual image-transfer.
* In the LINK mode, press F6' /> (CAPT)F2' />(PC)EXIT.

2. On the fx-9860G SD/fx-9860G, display the screen you want to transfer.

3. In FA-124, click the button with a camera (blue screen behind it) on the fx-9860 window toolbar.

4. On the fx-9860G SD/fx-9860G, press Shift' />7' />(CAPTURE).

5. The screen transferred to the computer will be displayed after transfer is complete.