Why for example when I try to ise calendar,3dplot,resitor colo codes,etc depending on what I have in my lists the program work or not?
why for example now i don?t have anything in lists "out of range error" and "dimension error" pop up every minute taking me crazy!!!
what could I do to solve this????
it seams that all programs use lists for plotting etc????
LISTS MANIPULATION
Started by
epaloco
, Apr 10 2003 05:11 PM
4 replies to this topic
#1
Posted 10 April 2003 - 05:11 PM
#2
Posted 10 April 2003 - 05:33 PM
What dimensions, and what data the lists have to contain varies from program to program.. (a good one would have a function to initialize the list..)
#3
Posted 10 April 2003 - 08:10 PM
I have the same problem once.......
The problem is the differents programs that uses the same list/matriz
The problem is the differents programs that uses the same list/matriz
#4
Posted 11 April 2003 - 05:50 AM
I have made some of these programs and modified some (calendar and 3d).
They're on my site for FX only.
If you need the CFX version I could send it to you or you could have them from the Casio Programs Avenue.
If you have the CFX version, it would probably cause errors on the FX, I had to modify them to work on CFX.
They're on my site for FX only.
If you need the CFX version I could send it to you or you could have them from the Casio Programs Avenue.
If you have the CFX version, it would probably cause errors on the FX, I had to modify them to work on CFX.
#5
Posted 11 April 2003 - 10:47 AM
coolll I have to see that...... tanks Mohamed
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users