10 replies to this topic

[noname11]

Simon Lothar found the key combo to access the diagnostic mode!
Read it here: http://revolution-fx...diagnostic_mode

Also, there's a combo for forcing your GII calc into OS update mode:

The primary emergency OS update can be triggered by simultaneously holding down F2' /> , 4' /> and while pressing the RESTART-button.
Release every button. The calc should show a blank display now. Finally press 9' /> and ×' /> consecutively.

------------
Key combos for older devices:

CFX Series: + F6' /> +
AFX Series: F1' /> + +

Edited by cfxm, 15 May 2010 - 12:33 PM.

[noname11]

New link: http://wiki.prizmwik...Diagnostic_Mode

Also, I have recently spotted a secret debug menu on the Casio Prizm!
Topic link: http://www.omnimaga....hp?topic=6807.0

[DJ Omnimaga]

Sorry, but I had to.

[noname11]

The Prizm test menu can be accessed via syscall 0x0EA7.
Topic link: http://www.omnimaga....hp?topic=6807.0


Diagnostics, test and debug menu.

Edited by cfxm, 15 April 2011 - 07:14 PM.

[flyingfisch]

Still a "Valiable Manager" ... did Casio learn nothing since the 9860?

I thought the diagnostic menu in the 9860 only said:

=DIAGNOSTIC MODE=
factory use only!

press: EXIT

so where does valiable manager come in?

{EDIT}
got rid of a typo

Edited by mfischer, 15 April 2011 - 05:00 PM.

[flyingfisch]

do you happen to have Insight? since casio kingdoms links broke, I cant find any other place to get it from
please either email or upload to file sharing
my email: mfischer At x2000club dot com

Edited by mfischer, 15 April 2011 - 09:15 PM.

[noname11]

New link: http://prizmwiki.omn...iagnostics_Mode
And the Prizm article: http://prizmwiki.omn...ki/Factory_test

@flyingfisch
Have a look here: http://www.casiocalc...=...ost&p=47291
The file includes a small test mode add-in.

Edited by cfxm, 19 November 2011 - 01:49 PM.

[flyingfisch]

Thanks, but i already have insight

[noname11]

I just did a small update and reposted this as the UCF disables the 'edit' button after a week or so.