33 replies to this topic

[PJay]

I can not upload files (*.exe) to AFX 2.0+ with Flash100 .
I download Flash100 from this site :
http://www.2072produ...nloaD/flash100/
Please help me step by step !, 2072
Thanks

[2072]

What is your problem exactly ?

[PJay]

I install Flash100 on my computer and I want to upload *.exe casio program files to AFX 2.0+.
But I can not use it Because I don't know Flash100 for upload *.exe files.
The other program ( FA-123, Casio Add-in installer, ...) can not upload *.exe files to AFX 2.0+.
(FA-123 for *.cat , Casio Add-in installer for *.cfx)
( for *.exe )
Please help me ! Thanks

[PJay]

I no problem for upload *.cat , *.cfx with FA-123 and Casio Add-in installer.
But I can not upload *.exe file with Flash100 !
Where I insert the *.exe files to Flash100 and ... !

[Overlord]

you can add files (exe and others) by right-clicking in the file list window at the right

[CrimsonCasio]

dont you have to turn them into .lec files or something?

[betoe]

I check your problem, first (i dont do it, only in my mind):

1) Choose the drive where you want to load the *.exe file
2) Choose the options of that drive, then "choose a file".
3) Put on "file name" *.exe, and then go to the folder where you have the file that you want load on the calculator.
4) Send the file to the calculator

I hope that this reply help you.

[PJay]

!!! MY AFX 2.0+ DOES NOT WORK !!! AND ALGEBRA1 DELETED !!! WHY ???

[PJay]

For more information please visit this picture :
http://earth.prohosting.com/afx2plus/
or
http://earth.prohost...~afx2plus/F.jpg

Please help me !

[PJay]

My AFX 2.0+ does not work and Algebra deleted and Only I can on/off it .
Why ?

[betoe]

thats strange. I see the pictures that you upload in your website, but i dont know the program that you use to write on your flash memory, whats the program name?

I start writing the flash memory of the calculator two weeks ago, using add-in installer (casio oficial software), and my calculator fall on error one time (i had to push the P button). Then i was using the calculator, i upload my basic programs and about 5 days later the programs have been deleted (like someone push the P button).

Its strange

[PJay]

I push the P button.
But also my calculator does not work .
My calculator hanged.
Why ? Is it a hardware problem ?

[CrimsonCasio]

try turrning you calc off, then hold F6' />[A b/c] and press [ON/AC], and whn it turns on hit 0 to reset your calc... that may work.

[2072]

Yes that's normal, before ading new incones on the main menu YOU MUST DOWNLOAD your system area becasue your calc is an AFX2.0+, the system zone is different from the normal AFX2.0. Once you have downloaded your system zone you can edit it to add icons...

Just do what CrimsonCasio said to reset your calc, it has to work...

[PJay]

Yes, Thanks.

[PJay]

But I can not upload *.exe files to AFX 2.0+ with Flash100 !
Please help me!

[PJay]

dont you have to turn them into .lec files or something?

Should I turn into *.exe to *.lec ?

[2072]

no, in the white area on the right of flash100 click right mouse button and click on the first entry, and choose exe files to add, then click on the first buton, "Cr?er un lecteur" and choose a filename.

Now that you've a .lec file choose a drive and use the file you've just created...

[PJay]

no, in the white area on the right of flash100 click right mouse button and click on the first entry, and choose exe files to add, then click on the first buton, "Cr?er un lecteur" and choose a filename.

Now that you've a .lec file choose a drive and use the file you've just created...

Should I choose a System File and How to find it ? (*.MemS,*.csf)

[betoe]

in that search, write *.exe to visualize the exe files and go search the file that you want to upload on their folder.

[PJay]

I added a *.exe file and created a *.lec file for Drive and there is a *.exe file in *.lec file and choose a drive (L:~Q:) and upload this to AFX 2.0+.
But the program does not upload !
Should I choose a System File to open the program from desktop of AFX 2.0+ ?

[betoe]

doooh!
i have the same problem, the programs are uploaded well, but in the "desktop" there's no icon of the files uploaded.

[betoe]

Casio Algebra FX 2.0 Plus: Crimsoncasio help us with our problem.

We need an "file explorer", to read the flash memory. I do this recommendation of crimsoncasio and works very well:

"use the Casio Add-In Installer to upload a file explorer like "linl"(you can download from the crimsoncasio website), then put all your other programs on the other drives with Flash100 (just not L because thats where the explorer will be) then you can run them using the explorer. "

I think that this topic end with this reply, finally I learnt to use flash100.

[PJay]

Please get me the address of Site ...
Is it "http://crimsoncasio.tripod.com/" ?
I can not open this site.
Can I download it from another site ?

[c@sioworld]

official site: www.casioworld.fr.st
http://perso.wanadoo...h100/index.html

[c@sioworld]

I suppose you have uploaded a file-explorer with Add-installer for example.
Flash100>>>
firstly you must select your serial port and cable. "Auto" doesn't work with WindowxXP
Secondly, you must create a virtual Lector. This virtual lector is going to contain exe files you want to upload.
You make a left click on 'drive creation' and select 'add-files'.
You build drive and associate the lector with a free drive.
Finally Your calculator: mode 'receive' and you press F5 you begin the communication.

[PJay]

I suppose you have uploaded a file-explorer with Add-installer for example.
Flash100>>>
firstly you must select your serial port and cable. "Auto" doesn't work with WindowxXP
Secondly, you must create a virtual Lector. This virtual lector is going to contain exe files you want to upload.
You make a left click on 'drive creation' and select 'add-files'.
You build drive and associate the lector with a free drive.
Finally Your calculator: mode 'receive' and you press F5 you begin the communication.

Please get me the address of "file-explorer" for download ...

[2072]

If you want a simple and effective file explorer just download TOUCHE (on my website) there is a .cfx that you can use with add-in installer so you have an Icone in the main menu.

But, you can create your icones with flash100: first select the system drive, give it a filename on your computer then on your calc press F2 and on Flash100 press F6. This will download your system area from your calc to your computer.

Then on the system drive click "option" and click view ; now you should have a complex window that displays your main menu, explore this area, using this you can create icones.

I hope it'll work!

[PJay]

TOUCHE Version 4.00 Beta or Version 3.80 ?

[2072]

The BETA is OK, you should use this version, no bugs were found till now (and I don't think there is any).

[betoe]

Anyway you can do the recommendation of crimsoncasio, its so easy, downloading LINL from:

http://www.crimsoncasio.co.nr

Only you need to install linl with the add-in installer(on L:), and the *.exe files to the other drives (M~Q). To open one exe file on the calc., first open linl , this program search the files on the flash memory and visualize them to the user. The only disadvantage is that no icon from the file is on the "desktop".

[PJay]

If you want a simple and effective file explorer just download TOUCHE (on my website) there is a .cfx that you can use with add-in installer so you have an Icone in the main menu.

But, you can create your icones with flash100: first select the system drive, give it a filename on your computer then on your calc press F2 and on Flash100 press F6. This will download your system area from your calc to your computer.

Then on the system drive click "option" and click view ; now you should have a complex window that displays your main menu, explore this area, using this you can create icones.

I hope it'll work!

Oh Yes , Only by Flash100. OK !

Thank You VERY MUCH

[MathManiac]

Hi ppl (good to be back).
Do you have any version of flash100 that may run on a pen, on a computer where i do not have administrator priviledges? (it sucks, but it is the only computer i have access right now with a COM port)

Yup.. just found the answer to my question:
Version 1.31 runs from a pen without any problem. It is not in the downloads list from ucn, but i still can get it on the Flash100 site.


http://flash100.free.fr/xoops/modules/wfdo...wcat.php?list=F