41 replies to this topic

[korrupt]

Hello everyone I need to put some exam notes onto my calculator, and I can do it, but for some reason using the program, making a new file, and copying text into it, it puts everything in a single line, and the text is rather large... I need the text to be as small as possible, and have each line seperate so you can scroll to the right...

Any ideas? Program im using is FA-124...
Thanks

[kucalc]

Hello korrupt and welcome to the forum.

Have you tried using my text reader TXTREAD? You can download it right here: http://www.casiocalc...amp;load_that=1

[korrupt]

thank you very much for your speedy reply, I have downloaded the program, but I dont know how to transfer it onto my calculator using fa-124... It seems to only be able to open g1r files....

Perhaps you could tell me the steps needed to get it onto my calculator?

I am not completely computer illiterate, so doesnt have to be too simplified.

Thanks again for your reply, I am eagerly anticipating a response.

[korrupt]

My apologies, I found it. However, I am still not sure where to put the text files, and in what format to put them...

thanks

[TyYann]

Try to put them in the space for e-activities. All the characters can be used and the formulas can be put in math format, not linear, which is very easy to read.

[IlPilota]

Hello korrupt and welcome to the forum.

Have you tried using my text reader TXTREAD? You can download it right here: http://www.casiocalc...amp;load_that=1

I downloaded TXTREAD and I put it on my SD. After I put SD in my calculator "fx-9860II SD", then I clicked "copy".
Calculator showed "ROOT" and I clicked execute. Now I've in main menu, after "SYSTEMS" a new icon called TXT2.
I click execute on TXT2 but calculator shows the loading icon (little square in up-right side) and freeze.

Is that application not good for my model? Or I can't use SD to import that application? If that application isn't good for my calculator can you post a link about the application I need?

Thank's very much

Edited by IlPilota, 27 July 2012 - 07:16 PM.

[Distorted Vision]

Hi,

Did you find a solution to this? I ma having the same problem with the same calculator model.

[flyingfisch]

Try using FA-124

[Distorted Vision]

I have. I want to put text files on the SD card. I've read about something called Noteview by Helder7 but I can't find a working download link.

[flyingfisch]

Oh, I see. Why don't you PM helder7?

BTW, Welcome to UCF! You should introduce yourself here.

[uvas]

Hello,
I want to put new text files into my fx-9680gII. I'm doing it with FA-124. I want to know how can i make new .g2e files with my text? I'm tryied to edit an old .g2e file from calc with notepad++, but if i change even a one letter and then i put edited file to FA-124 it says copy protection error and nothing do. Please help.
Thanks

[flyingfisch]

Hello,
I want to put new text files into my fx-9680gII. I'm doing it with FA-124. I want to know how can i make new .g2e files with my text? I'm tryied to edit an old .g2e file from calc with notepad++, but if i change even a one letter and then i put edited file to FA-124 it says copy protection error and nothing do. Please help.
Thanks

Ah, that's because it is in hex format. You can either make g2e's on your calc, or you can use this: http://www.casiocalc...-co?load_that=1

There is a function in that program that converts text to g1e

[uvas]

Thanks. I also found TXTREAD program, put into my calc and now i can put .txt files to calc and read it.

[flyingfisch]

Thanks. I also found TXTREAD program, put into my calc and now i can put .txt files to calc and read it.

Yeah, that works too. I thought you were trying to convert the text to an eactivity, thats why I showed you that.

BTW, Hello uvas and welcome to UCF! You should introduce yourself.

[dreamer]

hello,

i have fx-9860gii SD, i want to know the steps to put text in my Calculator.

i just bought it and i don't know anything in it.

Thanks

[Casimo]

You should try this tutorial.

[dreamer]

You should try this tutorial.

thinks ,

but i have a text format how i transfer it tog1e or g2e?

[Casimo]

You don't have to change th format. Just follow the step "Transfering g1a files" , but inside the open-window you select "All files" instead of "G1a files".Then you choose your textfile and continue the tutorial.

[dreamer]

You don't have to change th format. Just follow the step "Transfering g1a files" , but inside the open-window you select "All files" instead of "G1a files".Then you choose your textfile and continue the tutorial.

thinks for answering me.

do i have to do all that tutorial?

i transfer the text but i can't open it.

i am sorry for misunderstanding , i am not good in computer

[Casimo]

No, just follow the steps that explain how to transfer g1as. You can open the text file with Edit (download it at the UCF filesharing area and then transfer the g1a file like the tutorial explains(just "how to transfer g1a files")). Sorrythat I didn't tell you about the needed addin.

[dreamer]

No, just follow the steps that explain how to transfer g1as. You can open the text file with Edit (download it at the UCF filesharing area and then transfer the g1a file like the tutorial explains(just "how to transfer g1a files")). Sorrythat I didn't tell you about the needed addin.

Hi,

thanks

but i have this edit programme "EDIT 2012.08.28 - Release v1.60" how i put it in my calculator?

sorry for misunderstanding :

[Casimo]

You need the Edit.g1a file. Then you can follow the same tutorial again.

[dreamer]

you mean this programme ?

[Casimo]

Yes, I do.

[flyingfisch]

OFFTOPIC:

Dreamer, just curious, how did you get the start button on the right side of the screen?

[JosJuice]

OFFTOPIC:

Dreamer, just curious, how did you get the start button on the right side of the screen?

I think the UI is reversed because Windows is being displayed in a right-to-left language.

[flyingfisch]

I think the UI is reversed because Windows is being displayed in a right-to-left language.

Ah, I see.

[dreamer]

I think the UI is reversed because Windows is being displayed in a right-to-left language.

That's Right

Yes, I do.

i am sorry again , but there is a problem when i open the Edit

[Casimo]

You've got a PowerGraphic2-model. It seems like Edit doesn't work on your calculator (on mine, PowerGraphic2, too, it works).
You should try Noteview. Link: http://www.omnimaga.....0;attach=13336
(You need the g1a.)

[flyingfisch]

You've got a PowerGraphic2-model. It seems like Edit doesn't work on your calculator (on mine, PowerGraphic2, too, it works).
You should try Noteview. Link: http://www.omnimaga.....0;attach=13336
(You need the g1a.)

EDIT is open source now.... maybe you could port the getkey code?

[Casimo]

The strange thing is that Edit works on my calculator. I am going to have a look at the source.

[flyingfisch]

The strange thing is that Edit works on my calculator. I am going to have a look at the source.

You have a power graphic 2 model?

[Casimo]

Yes, I have:
Calculators:

fx9860 GII-2

Edit: Because of the source: I can't find anything. IsKeyDown is not used and RevolutionFx also not.

Edited by Casimo, 07 January 2013 - 03:17 PM.

[MicroPro]

Huh? This page: http://wiki.planet-c...patibility_List lists Edit 1.60 as "not working".

[Casimo]

But it works on my calc!
Screenshot:
http://s7.directuplo...er44dnu_gif.htm

[dreamer]

You've got a PowerGraphic2-model. It seems like Edit doesn't work on your calculator (on mine, PowerGraphic2, too, it works).
You should try Noteview. Link: http://www.omnimaga.....0;attach=13336
(You need the g1a.)

think you very much , it's work with my calculator

[china]

can some teach me how to store text inside fx-9860 calculator

[flyingfisch]

Hello china and welcome to UCF! You should introduce yourself.

Instead of posting the same question in 5 different topics, you should create one new topic with a descriptive name and ask your question in there. Also note that this is not Facebook and you may not get an answer within minutes.

[china]

ok i am sorry. but my question is how can i use my calculator open text massage

i am paul from imo state nigeria

[china]

if i store text inside my memory card and try to open it with fx-9860 calculator i just bought new it not open. please i need help. thanks for your understanding