Jump to content



Photo
- - - - -

Classpad Os 3.04 Is Up Again On Casio Website


  • Please log in to reply
13 replies to this topic

#1 McCoy

McCoy

    Casio Addict

  • Members
  • PipPipPip
  • 68 posts
  • Interests:play around with figures.

  • Calculators:
    CFX - 9850 GB PLUS,Classpad 330, TI-89 Titanium.

Posted 10 November 2009 - 11:53 AM

hey guys, OS 3.04 is uploaded again by casio. go and check it out.
I hope they have fixed the issues lol.
update your machines and tell us your experience. I have to wait for 3 months to pass.
Cheers

Edited by McCoy, 10 November 2009 - 11:53 AM.


#2 McCoy

McCoy

    Casio Addict

  • Members
  • PipPipPip
  • 68 posts
  • Interests:play around with figures.

  • Calculators:
    CFX - 9850 GB PLUS,Classpad 330, TI-89 Titanium.

Posted 11 November 2009 - 05:53 AM

Information for ClassPad330 OS 3.04 owners
(Include users who have updated Handheld OS to version 3.04)
CASIO has discovered the problems described below in the software of the CASIO ClassPad330 OS 3.04.Problems (1)In the Spreadsheet application, when Degree is specified for the angle unit and a trigonometric function is entered in a cell, calculation produces an incorrect result.(2)Executing a calculation in the Main application, exiting the Main application to another application and then returning to the Main application causes the calculation history data from the previous Main application session to be deleted.Please accept our sincere apologies for any inconvenience this problem may have caused customers, and rest assured that we are constantly striving to provide quality products that meet the calculator needs of people the world over.

said casio.

However, a big question remains: what about other knowns bugs? Are they fixed too? ...just curious.

#3 Omega

Omega

    Newbie

  • Members
  • Pip
  • 4 posts

  • Calculators:
    Classpad 300 (os 3.01), fx-991es

Posted 11 November 2009 - 08:44 AM

I've installed it (3.04.400):
I tried some things:
Main application problem seems ok (I can't reproduce the disappear again)
Quick test: Spreadsheet: I switched to deg, and made some trig calculations -> answers was correct (in deg: sin(180)=0; sin(pi)=0.0548; in rad: sin(180)=-0.801; sin(pi)=0)

Searching for new bugs... (hope I wont find new) :angry:

Edited by Omega, 11 November 2009 - 08:45 AM.


#4 afshin_electronic

afshin_electronic

    Casio Addict

  • Members
  • PipPipPip
  • 50 posts

  • Calculators:
    casio classpad 300plus
    casia fx-991ms

Posted 12 November 2009 - 12:04 PM

thanks for the good news!!! -_-

I updated my CP from 3.04.300 to 3.04.400!!! <_<

but unlike last times, I'm not going to check it for any bugs!!! I'm kinda tired of these bugs!!! <_<

#5 Guest_guest_*

Guest_guest_*
  • Guests

Posted 18 November 2009 - 07:51 PM

ClassPad Manager update 3.04.4000 available!

#6 kabel

kabel

    Newbie

  • Members
  • Pip
  • 3 posts

  • Calculators:
    ClassPad 330

Posted 03 December 2009 - 07:29 PM

What they fixed anyway? Does anybody knows where to find the summary of changes (fixes) from 3.03 to 3.04.4000?
In 3.04.4000 they did not fix the bug i care the most:
degree mode
e^(i*45)=0.5253+i0.8509
which is wrong!
And correct answer is:
degree mode
   e^(i*45)=0.7071+i0.7071
They fixed very little it seems.

Thank you,
Kabel

Edited by kabel, 03 December 2009 - 07:32 PM.


#7 McCoy

McCoy

    Casio Addict

  • Members
  • PipPipPip
  • 68 posts
  • Interests:play around with figures.

  • Calculators:
    CFX - 9850 GB PLUS,Classpad 330, TI-89 Titanium.

Posted 04 December 2009 - 12:34 PM

What they fixed anyway? Does anybody knows where to find the summary of changes (fixes) from 3.03 to 3.04.4000?
In 3.04.4000 they did not fix the bug i care the most:

degree mode
e^(i*45)=0.5253+i0.8509
which is wrong!
And correct answer is:
degree mode
   e^(i*45)=0.7071+i0.7071
They fixed very little it seems.

Thank you,
Kabel


yes, that's incorrect. thanks for pointing that out. I'm not upgrading and my classpad is getting dust near my fireplace. TI all the way.

#8 afshin_electronic

afshin_electronic

    Casio Addict

  • Members
  • PipPipPip
  • 50 posts

  • Calculators:
    casio classpad 300plus
    casia fx-991ms

Posted 05 December 2009 - 04:34 PM

unfortunately classpad is never gonna fix these bugs regarding degrees and radians!!

but for your specific problem, simply just add the degree mark after 45, and you will get the correct answer!

Edited by afshin_electronic, 07 December 2009 - 10:26 AM.


#9 weirleader

weirleader

    Newbie

  • Members
  • Pip
  • 29 posts
  • Gender:Male

  • Calculators:
    ClassPad 330
    fx-CG10 Prizm
    fx-9860GII
    fx-9750GII

Posted 05 December 2009 - 07:24 PM

unfortunately classpad in never gonna fix these bugs regarding degrees and radians!!

but for your specific problem, simply just add the degree mark after 45, and you will get the correct answer!


I think adding the degree mark only works if you leave the calc in radian mode (ironic, isn't it?).

#10 Guest_Guest_*

Guest_Guest_*
  • Guests

Posted 05 December 2009 - 09:34 PM

CASIO has discovered the problems described below in the software of the CASIO ClassPad330 OS 3.04.
Problems

(1)
In the Spreadsheet application, when Degree is specified for the angle unit and a trigonometric function is entered in a cell, calculation produces an incorrect result.

(2)
Executing a calculation in the Main application, exiting the Main application to another application and then returning to the Main application causes the calculation history data from the previous Main application session to be deleted.



#11 Guest_hellas1_*

Guest_hellas1_*
  • Guests

Posted 22 December 2009 - 03:42 AM

Hi all,

I have Windows 7 and wanted to know how to install the FA-CP1 on it.

Has anyone succeeded?

Please post!
hellas1

#12 Guest_cp330_*

Guest_cp330_*
  • Guests

Posted 02 April 2010 - 10:36 PM

I updated to 3.04 and now the program VIGACASIO doesn't work... an error appears when it starts to calculate moments, reactions, etc...

:banghead:

Can I return to 3.03?¿

#13 ASTRO491K

ASTRO491K

    Casio Addict

  • Members
  • PipPipPip
  • 94 posts

Posted 04 April 2010 - 05:52 PM

What in the world is wrong with the people at Casio? Do the people at the top of the food chain at Casio know how long has this been going on? It's time to ask them how long are the bug problems going to go on without being fixed? Has anyone written to the president of Casio? Clearly they need to make some personal changes or provide some modivation. This reminds me of the stuck accelerator problem in Toyota cars-tinkering around the edges without any real progress. Switching to TI isn't the answer because their machines are very limited in math capability. I wonder if the HP50g is the answer? Any body tried that route?

I updated to 3.04 and now the program VIGACASIO doesn't work... an error appears when it starts to calculate moments, reactions, etc...

:banghead:

Can I return to 3.03?¿



#14 McCoy

McCoy

    Casio Addict

  • Members
  • PipPipPip
  • 68 posts
  • Interests:play around with figures.

  • Calculators:
    CFX - 9850 GB PLUS,Classpad 330, TI-89 Titanium.

Posted 31 May 2010 - 12:32 PM

What in the world is wrong with the people at Casio? Do the people at the top of the food chain at Casio know how long has this been going on? It's time to ask them how long are the bug problems going to go on without being fixed? Has anyone written to the president of Casio? Clearly they need to make some personal changes or provide some modivation. This reminds me of the stuck accelerator problem in Toyota cars-tinkering around the edges without any real progress. Switching to TI isn't the answer because their machines are very limited in math capability. I wonder if the HP50g is the answer? Any body tried that route?



Well, I don't think it would make any news to point out that HP50g is currently the most powerful machine in its category...no question asked. cheers.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users