i think i found some kind of secret on the cfx9850g.
i held down a b/c and f6 while pressing ac/on
it appears to be some type of test mode.
secret screen
Started by
Atomic
, May 01 2003 07:08 AM
7 replies to this topic
#1
Posted 01 May 2003 - 07:08 AM
#2
Posted 01 May 2003 - 07:24 AM
In what screen were you when you pressed it?
#3
Posted 01 May 2003 - 11:30 AM
This is the kinda old news that should be stated in the faq whenever it'll be up and running
You can enter Test Mode by holding [a b/c]+F6' /> when pressing
You can do various tests here, and you exit by selecting Reset, and then No (unless you want to clear your memories)
On the AFX/FX1.0 you can also enter a memory check menu by holding F1' /> + [->] when pressing
(both of these are accessed on boot)
You can enter Test Mode by holding [a b/c]+F6' /> when pressing
You can do various tests here, and you exit by selecting Reset, and then No (unless you want to clear your memories)
On the AFX/FX1.0 you can also enter a memory check menu by holding F1' /> + [->] when pressing
(both of these are accessed on boot)
#4
Posted 01 May 2003 - 12:42 PM
you can also see the version of rom ,
The test menu version in my calc it`s ZX945 , but in AFX 2 +it`s other why , look the same , and why is 111 at the left bottom
The test menu version in my calc it`s ZX945 , but in AFX 2 +it`s other why , look the same , and why is 111 at the left bottom
#5
Posted 01 May 2003 - 08:24 PM
Because for different calcs exist different software
As you know there is several hardware differences between the CFX and the AFX
As you know there is several hardware differences between the CFX and the AFX
#6
Posted 02 May 2003 - 06:45 AM
um, yeah test mode.
we have to get the faq running.
we have to get the faq running.
#7
Posted 02 May 2003 - 11:49 AM
yeah , but i have AFX 2.0 , and test menu of AFX 2.0 Plus it`s a different code , and why 111As you know there is several hardware differences between the CFX and the AFX
#8
Posted 02 May 2003 - 01:36 PM
Different code for different ROM versions
the 111 means F1, F2, and F3 is operational
Press one of them, and you will go on to different tests (ascii, and error messages)
the 111 means F1, F2, and F3 is operational
Press one of them, and you will go on to different tests (ascii, and error messages)
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users