Are there some calc emulators?
I make some games in asm and don't want to install it every time i have a new change.
I want to save a time, patience and batteries...
Some emulators
Started by
Endi
, Jun 10 2003 06:43 PM
16 replies to this topic
#1
Endi
-
- Members
-
- 74 posts
Casio Addict
- Location:Wroclaw, Poland
-
Calculators:
AFX 2.0 PLUS
Posted 10 June 2003 - 06:43 PM
#2
X-thunder28
-
- Members
-
- 192 posts
Casio Freak
-
Calculators:
2 Graph100 (rom 1.02 and rom 1.03 (+) )
Posted 10 June 2003 - 07:32 PM
no, for the moment !
But I have 2 advice for you :
1- Have you use Flash100, the last release ? the transfert time can be 15 s for 100000 octet, and it can be less if you have less data to transfer .
2- Try to use PC routins for execute your ASM program on your PC !
I hope that advice could help you
But I have 2 advice for you :
1- Have you use Flash100, the last release ? the transfert time can be 15 s for 100000 octet, and it can be less if you have less data to transfer .
2- Try to use PC routins for execute your ASM program on your PC !
I hope that advice could help you
#3
huhn_m
-
- [Legends]
-
- 1957 posts
Casio Maniac
- Gender:Male
- Location:Germany / Dresden
-
Interests:Assembler(!!!)
Computers and Programming
Operating Systems
Programmable Calculators
Maths and everything arround it -
Calculators:
FX-82SX / AFX 2.0+ (ROM 1.03) / FX 1.0+ (ROM 1.03)
Posted 11 June 2003 - 04:00 PM
The problem is that flash100 doesn't run on all pc's. on mine it doesn't connect to the calc.
#4
2072
-
- Admin
-
- 1564 posts
Casio over god
- Gender:Male
- Location:Somewherebourg
- Interests:Alternative states of consciousness, programming, making things work the best they possibly can.
-
Calculators:
AFX2 ROM 1.02, CFX-9940GT+, FX-180P-Plus
Posted 11 June 2003 - 06:12 PM
hmmm... what kind of PC is yours? Have you selected the correct communication protocol in Flas100's options ? If you use Gcom you must select the Glink protocol else it won't work...
#5
Brazzucko
-
- Super Member
-
- 412 posts
UCF BASIC Programming Champion
-
Calculators:
FX 1.0, CFX 9850 GB Plus and FX 9750G
Posted 12 June 2003 - 09:25 AM
I have two notebooks ( ASUS A1300 and ASUS L3C ) and the flas100 doesn?t work in booth computers!!!!!!!!!! 
#6
huhn_m
-
- [Legends]
-
- 1957 posts
Casio Maniac
- Gender:Male
- Location:Germany / Dresden
-
Interests:Assembler(!!!)
Computers and Programming
Operating Systems
Programmable Calculators
Maths and everything arround it -
Calculators:
FX-82SX / AFX 2.0+ (ROM 1.03) / FX 1.0+ (ROM 1.03)
Posted 12 June 2003 - 11:32 AM
I didn't mean the GCom version but the version that links with the original casio link menu.
I tried it with both cable types but it didn't work :-(
I tried it with both cable types but it didn't work :-(
#7
X-thunder28
-
- Members
-
- 192 posts
Casio Freak
-
Calculators:
2 Graph100 (rom 1.02 and rom 1.03 (+) )
Posted 12 June 2003 - 02:17 PM
no, it could be the protocol used switch on Glink protocole and no Casio protocole !
#8
2072
-
- Admin
-
- 1564 posts
Casio over god
- Gender:Male
- Location:Somewherebourg
- Interests:Alternative states of consciousness, programming, making things work the best they possibly can.
-
Calculators:
AFX2 ROM 1.02, CFX-9940GT+, FX-180P-Plus
Posted 12 June 2003 - 10:15 PM
Well you should upload gcom to your AFX with something else than Flash100 and then use the Glink protocol with flash100 and gcom.
Flah100 is really interesting only if you use Gcom with it else it is as fast as Flashcom...
Brazzucko: what happens exactly?
In another post I detailed all you have to do to use Flash100.
Flah100 is really interesting only if you use Gcom with it else it is as fast as Flashcom...
Brazzucko: what happens exactly?
In another post I detailed all you have to do to use Flash100.
#9
Brazzucko
-
- Super Member
-
- 412 posts
UCF BASIC Programming Champion
-
Calculators:
FX 1.0, CFX 9850 GB Plus and FX 9750G
Posted 14 June 2003 - 01:33 PM
Well it?s simple when I try to launch the program a error message always appears, I have tested it in one ?non-notebook? PC and they works fine?? 
#10
2072
-
- Admin
-
- 1564 posts
Casio over god
- Gender:Male
- Location:Somewherebourg
- Interests:Alternative states of consciousness, programming, making things work the best they possibly can.
-
Calculators:
AFX2 ROM 1.02, CFX-9940GT+, FX-180P-Plus
Posted 14 June 2003 - 05:55 PM
Well what error message ?
Did you download the QT DLL ? Flash100 need it in order to work else an error dialog wil popup saying that the dll couldn't be found...
Did you download the QT DLL ? Flash100 need it in order to work else an error dialog wil popup saying that the dll couldn't be found...
#11
Maitre Kiwi
-
- Members
-
- 37 posts
Casio Fan
- Location:Kiwi Land
-
Calculators:
Casio Graph100 or FX2 for US people
Posted 19 June 2003 - 05:17 PM
yes my problem is the same on my notebook [NEC] flash 100 doesn't work
#12
Casto Productions
-
- Members
-
- 152 posts
Casio Freak
- Location:IL, USA
-
Calculators:
TI-83, TI-86, CFX-9850, AFX2.0
Posted 19 June 2003 - 11:49 PM
I've run into problems with Flash100 as well. I've got a desktop PC with Windows XP Pro, and the SB cable. I have no problem connecting normally to the calc through the normal link menu, but I cannot seem to connect using Gcomm. I switched the protocal appropriately and such, and I have the correct cable type selected because it works just fine normally. But somehow the Gcomm won't work for me. I get an error message on the computer saying that it didn't get a return message from the calc so transmission is terminated. I didn't do anything stupid like not having Gcomm in recieve mode or have the wrong protocol or comm number selected, because I checked everything four times.
On an even weirder note, every now and then the computer begins transmission for a few seconds, then stops, while other times it doesn't even seem to start. Any suggestions? Anyone else seeing what I am?
On an even weirder note, every now and then the computer begins transmission for a few seconds, then stops, while other times it doesn't even seem to start. Any suggestions? Anyone else seeing what I am?
#13
2072
-
- Admin
-
- 1564 posts
Casio over god
- Gender:Male
- Location:Somewherebourg
- Interests:Alternative states of consciousness, programming, making things work the best they possibly can.
-
Calculators:
AFX2 ROM 1.02, CFX-9940GT+, FX-180P-Plus
Posted 20 June 2003 - 04:37 AM
Well under w2k and XP the cable auto selection doesn't work so you must set it manually.
When using Gcomm act lik this:
In Flash 100 once you've selected the drives you want to send, push F5.
THEN in Gcomm push F2 (or put the cursor on receive and push exe).
and be sure to use compatible versions of Gcomm and Flash100, the latest one. Because the Gcomm protocol have changed through versions...
I hope this will help you.
When using Gcomm act lik this:
In Flash 100 once you've selected the drives you want to send, push F5.
THEN in Gcomm push F2 (or put the cursor on receive and push exe).
and be sure to use compatible versions of Gcomm and Flash100, the latest one. Because the Gcomm protocol have changed through versions...
I hope this will help you.
#14
Casto Productions
-
- Members
-
- 152 posts
Casio Freak
- Location:IL, USA
-
Calculators:
TI-83, TI-86, CFX-9850, AFX2.0
Posted 21 June 2003 - 05:44 PM
Hmm... haven't tried pushing F5 on the comp and THEN pushing F2 on the calc, think that will make the difference?
Also, I think I have the latest edition of both the programs, but how would I check the version of Gcomm? And what version number are they up to now?
I'll try that tonight and post again with my results, wish me luck, that would save me LOTS of time overall with as much as I transfer things back and forth trying to learn ASM
Also, I think I have the latest edition of both the programs, but how would I check the version of Gcomm? And what version number are they up to now?
I'll try that tonight and post again with my results, wish me luck, that would save me LOTS of time overall with as much as I transfer things back and forth trying to learn ASM
#15
2072
-
- Admin
-
- 1564 posts
Casio over god
- Gender:Male
- Location:Somewherebourg
- Interests:Alternative states of consciousness, programming, making things work the best they possibly can.
-
Calculators:
AFX2 ROM 1.02, CFX-9940GT+, FX-180P-Plus
Posted 22 June 2003 - 02:53 PM
Well look there: http://www.2072produ...nloaD/flash100/ for the latest versions, else you you can look on http://fgpstudios.free.fr/
#16
betoe
-
- [Legends]
-
- 846 posts
UCF Spanish Translator
- Gender:Male
- Location:Guadalajara/Mazatlan, Mexico.
- Interests:Electronics, SW development, automotive. Swim->bike->run
-
Calculators:
Algebra FX2.0 (R.I.P.), Classpad 300
Posted 25 June 2003 - 07:11 PM
Endi you can try to download CASIOCOM, i read that program is a software to communicate PC and calculator, in adition it works as a simulator of the calculator on the PC.
The problem is: that program dont work on my pc (i have windows ME)
i wish you have a better luck.
The problem is: that program dont work on my pc (i have windows ME)
i wish you have a better luck.
#17
Casto Productions
-
- Members
-
- 152 posts
Casio Freak
- Location:IL, USA
-
Calculators:
TI-83, TI-86, CFX-9850, AFX2.0
Posted 26 June 2003 - 06:42 PM
Ok, I feel foolish 
The pushing of the keys in that order (F5 on the PC and THEN F2 on the calc) worked, and I can transfer an entire full drive in about 16 seconds. Thanks for the help, hopefully I will have a game programed now that debugging won't take 48 seconds a trial! 
The pushing of the keys in that order (F5 on the PC and THEN F2 on the calc) worked, and I can transfer an entire full drive in about 16 seconds. Thanks for the help, hopefully I will have a game programed now that debugging won't take 48 seconds a trial!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
