Jump to content



Photo
- - - - -

Regression Constants Casio fx 9860 GII

regression fx9860gii

Best Answer pan.gejt , 14 February 2018 - 07:31 PM

The procedure is a little bit more difficult. The VARS key is used to recall the variables.
Switch to Stat mode
For Graph variables (a, b, c, r, r^2...)
1. fill the data into the columns, eg, List 1 for x and List 2 for y
2. press F2 (CALC)
3. press F3 (REG)
4. press F1 (X)
5. select F1 or F2 (the equation depends on your preferences)
6. press F6 (COPY)
7. select the graph variable, where the regression result should be stored e.g. Y1 and press EXE (the previous screen will appear)
8. press exit
9. put the cursor e.g. on List 3, position 1 
10 press VARS key
11. press F3(STAT)
12 press F3 (Graph)
13 select the desired result (F1 for a, F2 for b, F1 on the 2nd screen for r) and press ENTER
14 the value is inserted into the cell
----------------------------------------------------
For X and Y results (n, mean x, mean y, sum x, sum y, ...)
1. fill the data into the columns, eg, List 1 for x and List 2 for y
2. press F2 (CALC)
3. press F2 (2VAR), you can scroll down to see all results; note the difference - for graph is used the F3 key
4. press EXIT
5. put the cursor e.g. on List 3, position 4 (the first 3 cells is supposed to be for a, b and r in my example)
6. press VARS key
7. press F3(STAT)
8. press F1 (X) pr F2 (Y)
9. select the desired result and press ENTER
10. the value is inserted into the cell
--------------------------------------------------
 
After switching to the RUN-MAT menu you can recall your result by using command: List 31, List 32 and so on
 
OPTIONALLY
 
You can recall the results in RUN-MAT mode without inserting the results into the list, but you still need to compute GRAPH or 2VAR first otherwise the Memory ERROR is displayed.
 
1. fill the data into the columns, eg, List 1 for x and List 2 for y
2. press F2 (CALC)
3. press F3 (REG)
4. press F1 (X)
5. select F1 or F2 (the equation depends on your preferences)
6. press F6 (COPY)
7. select the graph variable, where the regression result should be stored e.g. Y1 and press EXE (the previous screen will appear)
8. press exit
9. switch to RUN-MAT mode
10 press VARS key
11. press F3(STAT)
12. press F3 (Graph)
13. select the desired result (F1 for a, F2 for b, F1 on the 2nd screen for r) and press ENTER, optionally you can asign the result to the variable (n->A) 
 
Similar procedure is for X and Y results.
Go to the full post


  • Please log in to reply
2 replies to this topic

#1 TOM_DLB_89

TOM_DLB_89

    Newbie

  • Members
  • Pip
  • 4 posts
  • Gender:Not Telling

  • Calculators:
    Casio fx-9860 GII
    Casio fx-991ES PLUS
    Casio fx-82ES PLUS

Posted 14 February 2018 - 04:09 PM

Is there any way to store the values of 'a', 'b'... constants after doing the regression in STAT mode?

Other models, which are simpler than fx 9860 GII (such as fx-991ES PLUS and fx-82ES PLUS), allow the storage of the constants and other values that are provided by the calculator.



#2 pan.gejt

pan.gejt

    Casio Freak

  • Members
  • PipPipPipPip
  • 264 posts
  • Gender:Male
  • Location:CZ

  • Calculators:
    .

Posted 14 February 2018 - 07:31 PM   Best Answer

The procedure is a little bit more difficult. The VARS key is used to recall the variables.
Switch to Stat mode
For Graph variables (a, b, c, r, r^2...)
1. fill the data into the columns, eg, List 1 for x and List 2 for y
2. press F2 (CALC)
3. press F3 (REG)
4. press F1 (X)
5. select F1 or F2 (the equation depends on your preferences)
6. press F6 (COPY)
7. select the graph variable, where the regression result should be stored e.g. Y1 and press EXE (the previous screen will appear)
8. press exit
9. put the cursor e.g. on List 3, position 1 
10 press VARS key
11. press F3(STAT)
12 press F3 (Graph)
13 select the desired result (F1 for a, F2 for b, F1 on the 2nd screen for r) and press ENTER
14 the value is inserted into the cell
----------------------------------------------------
For X and Y results (n, mean x, mean y, sum x, sum y, ...)
1. fill the data into the columns, eg, List 1 for x and List 2 for y
2. press F2 (CALC)
3. press F2 (2VAR), you can scroll down to see all results; note the difference - for graph is used the F3 key
4. press EXIT
5. put the cursor e.g. on List 3, position 4 (the first 3 cells is supposed to be for a, b and r in my example)
6. press VARS key
7. press F3(STAT)
8. press F1 (X) pr F2 (Y)
9. select the desired result and press ENTER
10. the value is inserted into the cell
--------------------------------------------------
 
After switching to the RUN-MAT menu you can recall your result by using command: List 31, List 32 and so on
 
OPTIONALLY
 
You can recall the results in RUN-MAT mode without inserting the results into the list, but you still need to compute GRAPH or 2VAR first otherwise the Memory ERROR is displayed.
 
1. fill the data into the columns, eg, List 1 for x and List 2 for y
2. press F2 (CALC)
3. press F3 (REG)
4. press F1 (X)
5. select F1 or F2 (the equation depends on your preferences)
6. press F6 (COPY)
7. select the graph variable, where the regression result should be stored e.g. Y1 and press EXE (the previous screen will appear)
8. press exit
9. switch to RUN-MAT mode
10 press VARS key
11. press F3(STAT)
12. press F3 (Graph)
13. select the desired result (F1 for a, F2 for b, F1 on the 2nd screen for r) and press ENTER, optionally you can asign the result to the variable (n->A) 
 
Similar procedure is for X and Y results.


#3 TOM_DLB_89

TOM_DLB_89

    Newbie

  • Members
  • Pip
  • 4 posts
  • Gender:Not Telling

  • Calculators:
    Casio fx-9860 GII
    Casio fx-991ES PLUS
    Casio fx-82ES PLUS

Posted 15 February 2018 - 09:18 AM

Thank you!





Also tagged with one or more of these keywords: regression, fx9860gii

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users